Getting started with loom darning

Hello! Welcome! Elysha here :)

Since we started making the Swift Darning Loom in 2019, I've put out a whole bunch of tutorials and videos and blogs and I can see how it's become tricky to navigate if you're just jumping in. Here are a few beginner-friendly resources that I hope will make things make sense.

If you still have questions, or have specific requests for tutorials or techniques, please contact me through the form at the bottom of this page :):)

I'm so glad you're here, thanks for being curious about what we do. Happy mending!

Darning start to finish + Warping Helper

This is the first full tutorial where I include an explanation of our Warping Helper! Bonus for me: it was also a pretty good hair day ;P

I also talk about my preferred thickness of yarn (aka sock or fingering weight) and how I sometimes double up thinner yarn to get a thinner patch.

Collapsible content

What yarn should I use?

Quick answer: I mostly use a wool blend sock yarn, or crochet/sashiko cotton.

Long answer: I wrote a whole blog post about this!

Medium answer: two key parts -- fibre type, and yarn thickness.

Fibre type: it's best to match what your original fabric is made from, or at least make sure that the yarn you're using has the same care requirements as the garment you are patching.

Yarn thickness: A good rule of thumb is to match the weight of yarn that was used to make the fabric, or go a little bit thinner.

Like I said up top, "sock" or "fingering" weight is my go-to. I find it works great for socks as well as most other knitwear like sweaters, scarves, hats, mittens, blankets that I tend to repair.

It also matches the size of the loom well. Thicker yarn can make it harder to slip your needle through the loops as the yarn closes the gap made by the hooks. Thinner yarn creates a looser weave (or an unbalanced one) which isn't a problem on its own but won't make as strong a patch as a tight, dense weave.

In the video above, the dark warp is sock yarn and the grey weft is thinner (maybe lace weight). Doubling up lace weight yarn can help fill in the gaps for a tighter weave while still creating a thinner patch than sock yarn will.

Can I mend the edge of fabric with it?

Sure! I have two blog posts about this. Part 1 talks about a non-stretch mend and Part 2 deals with a sweater cuff.

Colour play: Houndstooth

A darning loom is a two-shaft loom, which means the easiest weave it can do is your basic over-under-over-under. Houndstooth is a pattern that has that over-under structure but the colours make it look a little more complicated.

I made a YouTube video on how it's done.

Weaving with the Swift Loom

Okay, I will admit this is a huge gap in my YouTube channel and I have a massive backlog of weaving videos I need to edit. But here's a link to the unlisted video that follows along with the "How To Weave" booklet that comes with our Darning and Weaving bundle.

What makes the Swift different from other mini looms?

We make this loom with our core values of sustainability and reuse in mind.

Right away, you probably noticed two things: price, and design. I'll leave price for the next point.

Upcycled materials:

We use reclaimed solid hardwood paired with high-quality birch plywood for the base, reclaimed stainless steel bicycle spokes for the characteristic hooks, and stainless steel hardware to hold everything together. The wood is sanded to a fine finish and left bare, allowing it the potential to develop a beautiful patina with age and use.

All of the textiles we use for sewing pouches, packaging, and making t-shirt yarn for reusable ties are sourced secondhand, and while not all hardware and materials can be sourced locally, we proudly source YKK zippers that are made in Montreal!

Smarter geometry:

Long story short, we don't know how to use a lathe, and darns are square anyway!! Making our base a rectangle means you can make a bigger patch AND let us design the XL version...which led to Swift Weaving...and the drive to make every single thing in my life multifunctional or bust intensifies ;)

Why so expensive though?

Our other half of sustainability includes paying people enough to sustain a decent livelihood!

Our prices are right: we do not pad them with extra profit to account for markdowns, so we dodge all the nonsense capitalist SALE SALE SALE BUY NOW nonsense. We calculate based on the labour, overhead, and material costs that go into making our products, at a rate that allows everyone on our team to earn a living wage for their work. We don't even do wholesale, because that would mean raising our prices to account for retail markup.

We are a small-scale manufacturer in Canada. Probably smaller than small. Our core team is three people: two full time and one part time, with occasional support from one or two others. Everyone who works with us makes a couple bucks above a living wage for our region.

Do you donate your profits anywhere?

There's no real reason I need to tell you about this stuff except I want to and I think it's important and it's the kind of world we want to live in, so we're building it.

I just told you we don't even build enough wiggle room into our prices to do wholesale... and strictly speaking, we don't make profits. Profit is wealth extracted from the working class by the capitalist class via worker exploitation. We are all workers here, and those who run the numbers are very open about what those numbers are. On lucky years when our earnings overflow our crew's living wage base salaries, we split that up equitably between everyone who made it happen.

If anywhere, our "profits" go back into the community that makes Worth Mending possible: Kwartzlab Makerspace. Sharing tools and space keeps our overhead costs low, sure, but it's also a volunteer-run community where we, well, volunteer a lot of time and skills to keep it running. Before Kwartzlab, we (that core team of three I mentioned before) were heavily involved in community bike shops, so these sorts of spaces have always been super important to us and we're so grateful that we're able to have such an awesome mutual relationship with this one. Literally Worth Mending would not exist without Kwartlab, and no I will not shut up about it xoxo.

And yeah, we also donate cash to various local grassroots orgs we think are important, or throw mutual aid money around when people we know need it. But that comes out of our salaries, as individuals, not on behalf of Worth Mending.

Have other questions, or tutorial requests?